Page 299 - The Central Motor Vehicles Rules, 1989

RULE 115H THE CENTRAL MOTOR VEHICLES RULES, 1989 271

TABLE 1
Test requirements for type approval for M and N category vehicles
with Gross Vehicle Weight not exceeding 3,500 kilograms
Sr. No. Test Applicability
1. Gaseous pollutants (Type I test) 1 [On both Gasoline and M15 or M85 or
M100 fuel (As per prevailing gasoline
2. Idle and high idle emission (Type II Test)
emission norms)]
3. Crankcase emission (Type III) Only on Gasoline fuel
4. Evaporative emissions (Type IV) Only on Gasoline fuel

5. Durability (Type V) Only on Gasoline fuel
1
6. On-board diagnostics (OBD)-OBD [On both Gasoline and M15 or M85 or
I/OBD II as applicable M100 fuel (As per prevailing gasoline
emission norms)]
TABLE 2
Test requirements for type approval for two or three wheeled vehicles
Sl. No. Test Applicability
1. Gaseous pollutants (Type I Test) 1 [On both Gasoline and M15 or M85 or
M100 fuel (As per prevailing gasoline
2. Idle and emission (Type II Test)
emission norms)]
3. Crankcase emission (Type III) Only on Gasoline fuel
4. Evaporative emissions (Type IV) Only on Gasoline fuel
5. Durability (Type V) Only on Gasoline fuel
1
6. On-board diagnostics (OBD)-OBD [On both Gasoline and M15 or M85 or
I/OBD II as applicable M100 fuel (As per prevailing gasoline
emission norms)]

TABLE 3
Test requirements for type approval for M and N category vehicles
with Gross Vehicle Weight greater than 3,500 kilograms

Sr. No. Test Applicability
1. Gaseous Pollutants Test on MD95
2. Free acceleration smoke
3. Durability
4. On-board diagnostics (OBD)

Notes :
1. Mass emission tests shall be carried out as per MoRTH/CMVR/TAP-115/116
Issue 4 or AIS 137, as amended from time to time, as applicable and suitable
updation of the ratios of gas component densities to exhaust gas density,

1 Substituted for “On both Gasoline and M15 or M100 fuel” vide GSR 37(E), dt. 17-1-2020, w.e.f. 17-1-2020.