Page 320 - The Central Motor Vehicles Rules, 1989

292 THE CENTRAL MOTOR VEHICLES RULES, 1989 RULE 125

shall be in accordance with AIS-034 (Part 1) (Rev. 1):2010 standard as amended from
time to time till the corresponding BIS specifications are notified under the Bureau of
Indian Standards Act, 2016 (11 of 2016):
PROVIDED that S1 and C21 categories of bulbs specified in AIS-034 (Part 1) (Rev.
1):2010 standard as amended from time to time, shall not be used in lighting and
light-signaling devices of power tillers manufactured on and after the 1st day of October,
2019:
PROVIDED FURTHER that R2 category of bulbs specified in AIS-034 (Part 1) (Rev.
1):2010 standard as amended from time to time, shall not be permitted for use in head
lamps for power tillers manufactured on and after the 1st day of October, 2019.]
(2) The lighting and signalling devices shall be in accordance with AIS:062:2004,
as amended from time to time, till the corresponding BIS specifications are notified
under the Bureau of Indian Standards Act, 1986 (63 of 1986).
(3) The safety and comfort of the operator of a power tiller shall be in accordance
with IS:12239 (Part 3):1996, as amended from time to time.
(4) The gradeability of a power tiller coupled to a trailer under the declared
combination weight by the manufacturer shall be in accordance with IS:9980:1988, as
amended from time to time.]
1

[124-C. Safety Standards of components for Construction Equipment Vehicles
(CEV)
124C
Construction equipment vehicles, shall comply with the provisions of AIS-160:
PROVIDED that Part 1 of AIS-160, shall be applicable for construction equipment
vehicles, as per scope of AIS-160, manufactured on and after the 1st April, 2021:
PROVIDED FURTHER that Part 2 of AIS-160, shall be applicable for construction
equipment vehicles, as per scope of AIS-160, manufactured on and after the 1st April,
2024.]
2

[125. Safety Belt, collapsible steering column, auto dipper and paddy dash boards
3
[(1)] One year from the date of commencement of the Central Motor Vehic 125 s
e
l
(Amendment) Rules, 1993, the manufacturer of every motor vehicle other than motor
4
cycles and three-wheelers [x x x] shall equip every such vehicle with a seat belt for the
driver and for the person occupying the front seat:
5
[PROVIDED that on and after 1st October, 2014, the requirements under this rule
shall be applicable to every quadricycle:
PROVIDED FURTHER that the requirement for safety belt assembly and safety
belt anchorages for quadricycles shall conform to IS 15140:2003 and IS 15139:2002,
respectively.]

1 Inserted vide GSR 673(E), dt. 27-10-2020, w.e.f. 27-10-2020.
2 Substituted vide GSR 338(E), dt. 26-3-1993.
3 Numbered as sub-rule (1) vide GSR 720(E), dt. 10-9-2003, w.e.f. 10-10-2003.
4 Words "of engine capacity not exceeding 500 cc" omitted vide GSR 276(E), dt. 10-4-2007, w.e.f. 10-4-2007.
5 Inserted vide GSR 99(E), dt. 19-2-2014, w.e.f. 1-10-2014.