Page 151 - The Central Motor Vehicles Rules, 1989
P. 151

RULE 95D        THE CENTRAL MOTOR VEHICLES RULES, 1989               123

                                 Europe (ECE), Japanese Automotive Tyre Manufacturers’  Association  (JATMA),
                                 European Tyre & Rim Technical Organisation (ETRTO), The Tyre & Rim Association
                                 Inc. (T & RA) and Indian Tyre Technical Advisory Committee (ITTAC), etc., shall be
                                 accepted.]
                                 1

                                  [95B.   Size and ply rating of tyres for power tillers
                                                                                                      95B
                                      (1)  The  tyre should  have  load carrying capacity as specified by  the  ty r e
                                 manufacturer, however, the maximum load specified by the power tiller manufacturer
                                 shall not be greater than that permitted by the tyre manufacturer.
                                      (2) The power tiller manufacturer shall select the recommended/preferred rim
                                 sizes only, as suggested by the tyre manufacturer.
                                      Note : For compliance to this rule, the following standards shall be referred to,
                                 namely:—
                                        (i) IS:13154-1991, as amended from time to time - Tyre for agricultural tractor,
                                            implement and power tillers.
                                        (ii) In case a particular size of tyre is not listed in IS:13154-1991, as amended
                                            from time to time, any equivalent International Standard like ECE, JATMA,
                                            ETRTO, TNRA, ITTAC, etc.]
                                 2

                                  [95C.   Size and ply rating of tyres for modular hydraulic trailers
                                                                                                      95C
                                      (1) The tyres including radial tyres used on modular hydraulic trailers shall be in
                                 accordance with IS 15636:2005, as amended from time to time.
                                      (2) The tyre of modular hydraulic trailers shall have load carrying capacity as
                                 specified by the tyre manufacturer, however, the maximum load specified by the
                                 modular hydraulic trailers manufacturer shall not be greater than that permitted by the
                                 tyre manufacturer.
                                      (3) The modular hydraulic trailer manufacturer shall select the recommended or
                                 preferred rim sizes only, as suggested by the tyre manufacturer and the wheel rims shall
                                 conform to IS 9438:1980.
                                      Note  : For compliance to this  rule, any equivalent national or international
                                 standards such as Indian Standards (IS), Automotive Industry Standard (AIS), ECE
                                 (Economic Commission of Eurupe), Japan Automobile Tyre Manufacturers’ Association
                                 (JATMA), European Tyre and Rim Technical Organisation (ETRTO, Tyre and Rim
                                 Association Inc. (TRA), Indian Tyre Technical Advisory Committee (ITTAC), etc., may
                                 be referred.
                                 95D.    Limited road trials
                                      The Hydraulic Modular Trailer with specified Gross Vehicle Weight or maximum
                                                                                                      95D
                                 load  carrying capacity shall  be subjected  to minimum  hundred kilometres run
                                 preferably on plain roads with speed less than ten kilometres per hour.]










                                 1  Inserted vide GSR 589(E), dt. 16-9-2005, w.e.f. 16-9-2006.
                                 2  Inserted vide GSR 212(E), dt. 20-3-2015, w.e.f. 1-4-2015.
   146   147   148   149   150   151   152   153   154   155   156