Page 197 - The Central Motor Vehicles Rules, 1989
P. 197

RULE 115        THE CENTRAL MOTOR VEHICLES RULES, 1989               169

                                        10. The vehicles meeting the above norms shall use commercial fuel as per BIS
                                            specification  IS:1460-2000 (Amendment  No. I—January, 2003) (Fourth
                                            Revision) for Diesel and IS:2796-2000 (Amendment No. II—February, 2003)
                                            (Third Revision) for Gasoline.
                                        11. In case of diesel vehicles, the engine power shall be measured on engine
                                            dynamometer and the measured power shall not differ from the specified
                                            power as given below:
                                             (i) For Type approval: ± 2% at maximum power point and + 6% and - 2%
                                                at other measurement points.
                                            (ii) For conformity of production:-5% /+8% at maximum power point.
                                            (iii) Testing procedures shall be in accordance with Chapter 6 of Part IV of
                                                the reference document MOST/CMVR/TAP-115/116, as amended
                                                from time to time by the Government of India in the Ministry of
                                                Shipping, Road Transport and Highways.
                                        12. The vehicles mentioned in clause (D) shall also comply with rule 115 (2).
                                      (E) Diesel vehicles with GVW exceeding 3500 kg and fitted with advanced exhaust
                                 after treatment system including De-NOx  catalyst and/or particulate trap  shall
                                 additionally conform to the following norms:—
                                                Limit Values for Types Approval (TA) as well as (COP)

                                                          Engine Transient Cycle (ETC)

                                     CO (g/kWh)        HC (g/kWh)        NOx (g/kWh)       PM (g/kWh)

                                                                                                   (3)
                                         5.45              0.78              5.0            0.16/0.21
                                      (3) For engines having swept volume of less than 0.75 litre per cylinder and rated
                                 power speed of more than 3000 rpm.
                                      Notes:
                                         1. The test shall be on engine dynamometer.
                                         2. There shall be no relaxation for COP purposes.
                                         3. The gaseous and particulate emissions are to be determined on the ETC test
                                            as described in EEC document 1999/96/EC and comply with the norms
                                            given above.
                                         4. In addition, the gaseous and particulate emissions are to be determined on
                                            the ESC test as described in EEC document 1999/96/EC and meet the
                                            prescribed gaseous and particulate emissions norms as given in clause (D).
                                         5. In addition, the smoke opacity is to be determined on the ELR test as
                                            described in EEC document 1999/96/EC and meet the prescribed smoke
                                            density norms as given in clause (D).
                                         6. The reference fuel shall be as specified in Annexure IV F.
   192   193   194   195   196   197   198   199   200   201   202