Page 234 - The Central Motor Vehicles Rules, 1989

206 THE CENTRAL MOTOR VEHICLES RULES, 1989 RULE 115

Idle Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes
emission (both (both (gaso- (both (B7
(Type II) fuels) fuels) line fuels) only)
only)
Crankcase Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
emission
(Type III
test)
Evapo- Yes No No No No Yes Yes Yes Yes No No No
rative (gaso- (gaso- (gaso- (gaso-
emission line line line line
(Type IV only) only) only) only)
test)
Durability Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
(Type V (gaso- (gaso- (gaso- (gaso- (B7
test) line line line line only)
only) only) only) only)
(4) 2
CO & Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Fuel (both (both (both (both (both
consum- fuels) fuels) fuels) fuels) fuels)
ption
On broad Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
diagnosis (gaso- (gaso- (gaso- (gaso- (B7
OBD line line line line only)
only) only) only) only)
Smoke No No No No No No No No No Yes Yes No
Opacity (B7
Only)
(1)
Vehicles fuelled with bio diesel blends up to 7% shall be tested with reference diesel
(B7) and vehicles fuelled with Bio diesel blends above 7% will be tested with respective
blends.
(2)
In case of PI engines, applicable only to vehicles with direct Injection engines.
(3)
Vehicles models and variants having option for Bi-fuel operation and fitted with
limp-home gasoline tank of capacity not exceeding two litres on two wheelers shall be
exempted from test in gasoline mode.
(4)
CO2 emission and fuel consumption shall be measured as per procedure laid down
in AIS 137 and as amended time to time.
When bi-fuel vehicle is combined with a flex fuel vehicle, both test requirements are
applicable. Vehicle tested with E100 need not to be tested with E85.
Notes:
(1) The test shall be on Chassis Dynamometer.
(2) Classification of vehicles and weighting factor for the final emission result shall
be as given below:—