Page 237 - The Central Motor Vehicles Rules, 1989
P. 237

RULE 115        THE CENTRAL MOTOR VEHICLES RULES, 1989               209

                                        (9) Conformity of Production (COP) test procedure shall be as per clause (e) of
                                            sub-rule (12) of rule 115. For 2W vehicles, at least 50% of Vehicle models
                                            produced from particular plant shall be selected randomly from dealer’s
                                            location or warehouse.
                                       (10) The  engine power shall be measured  on  engine dynamometer and
                                            measured power shall conform to the power specified and tested as per
                                            procedure prescribed in AIS 137 and as amended time to time.
                                       (11) The vehicle presented for Type approval shall have been run for at least
                                            1000 km before the test.
                                       (12) The Two wheeler vehicles shall be equipped with On-Board Diagnostic
                                            (OBD) systems for emission control which shall have the capability of
                                            identifying the likely area of malfunction by means of fault codes stored in
                                            computer memory as per the procedure laid down in AIS 137.
                                            The On-Board Diagnostic (OBD) systems for emission control shall be as
                                            specified in the following Tables:—
                                                                 1
                                                                  [TABLE 1
                                                      OBD FUNCTIONS AND ASSOCIATE
                                 A. Vehicles manufactured on or after 1st April, 2020, shall be required to comply with
                                 the following OBD Stage I (BS VI) requirements/standards/compliances as per AIS
                                 137:—
                                  Sr. No.                         Monitoring Items
                                    1.  Circuit continuity for all emission related power train component
                                    2.  Distance travelled since MIL (Malfunction indicator lamp) ON

                                    3.  Electrical disconnection of Electronic evaporative purge control device
                                    4.  EGR system monitoring
                                                                  TABLE 2
                                                      OBD FUNCTIONS AND ASSOCIATE
                                 B. Vehicles manufactured on or after the 1st April, 2023, shall be required to comply
                                 with the following OBD Stage II-A (BS VI) requirements/standards/compliances as per
                                 AIS 137:—

                                  Sr. No.                         Monitoring Items
                                    1.  Circuit continuity for all emission related power train component
                                    2.  Circuit Rationality
                                    3.  Distance travelled since MIL (Malfunction indicator lamp) ON

                                    4.  Electrical disconnection of Electronic evaporative purge control device
                                    5.  EGR system monitoring
                                    6.  Misfire Detection


                                 1  Substituted vide GSR 809(E), dt. 9-11-2022, w.e.f. 10-11-2022.
   232   233   234   235   236   237   238   239   240   241   242