Page 441 - The Central Motor Vehicles Rules, 1989
P. 441

RULE 138        THE CENTRAL MOTOR VEHICLES RULES, 1989               413
                                            1
                                            [PROVIDED that in case of vehicles manufactured on and after 1st January,
                                            2003, the triangles of size and specification shall conform to AIS : 022-2001,
                                            as may be amended from time to time, till such time as corresponding
                                            Bureau of Indian Standards specifications are notified:]
                                            2
                                            [xxx]
                                        (d) First aid kit containing a tube of antiseptic cream containing 0.5% of
                                                                            3
                                            Centrimide B.P. in a non-greasy base,  [xxx] sterilised dressings, sterilised
                                            elastic plaster, water proof plaster, gauze and elastic bandage for wounds
                                            and burns;
                                        (e) Number of chock blocks for four wheelers as specified below, namely:—
                                            • one chock block in case of four wheelers with GVW exceeding 4 tonnes
                                              and less than 7.5 tonnes;
                                            • two chock blocks in case of 4 wheelers with GVW exceeding 7.5 tonnes.
                                            The vehicles manufacturer shall ensure that the above items are supplied
                                            at the time of first sale of vehicle.
                                       4
                                        [(f) At the time of purchase of the two wheeler, the manufacturer of the two
                                            wheeler shall supply a protective headgear conforming to specifications
                                            prescribed by the Bureau of Indian Standards under the Bureau of Indian
                                            Standards Act, 1986:
                                      PROVIDED that these conditions shall not apply to category of persons exempted
                                 in terms  of section  129  and the rules  made thereunder  by  the concerned  State
                                 Government.]
                                      (5) Halogen bulbs with P45t cap shall not be used for head lights on all vehicles.
                                 Wattage of halogen bulbs shall not exceed 70/75 Watts for 24 Volts and 60/65 for 12
                                 Volts systems.]
                                      5
                                      [(6) On and after 1st April, 2016, the driver of motor vehicle of M1 category,
                                 manufactured on and after 1st October 2014, excluding transport vehicles and special
                                 purpose vehicles shall ensure that a child, up to age of twelve years, carried in the vehicle
                                 is seated in an appropriate child restraint system conforming to AIS:072-2009.]










                                 1  Inserted vide GSR 400(E), dt. 31-5-2002, w.e.f. 31-5-2002.
                                 2  Second proviso omitted vide GSR 784(E), dt. 12-11-2008, w.e.f. 1-4-2009. Prior to omission, it read as under:
                                    “PROVIDED FURTHER that in addition, M3 of category of vehicles shall also be required to install
                                    retro-reflective triangle complying to AIS:022:2001, as amended from time to time, excluding the
                                    requirements specified in clauses 7.2, 7.3, 7.4, 7.7, 8.1.2 and 5.0, 6.0, 11.0 of Annexure-4 of the said standard.
                                    The colour of the triangle fitted in the front of the vehicle shall be white and that of rear shall be red.  The
                                    location of both the triangles shall be at least one metre above the ground level at the front and rear,
                                    preferably at the centre of the vehicle.  For the purposes of  "white colour warning triangle", the word "red"
                                    shall be substituted by word "white", wherever applicable in AIS:022:2001.  The colour requirements of
                                    white retro-reflective portion shall be as per clause 8.5 of AIS:057 and white fluorescent material shall be
                                    as per clause 7.1 of ISO:7591-82 (E).”
                                 3  Words “a tube of Feracrylum of 1% gel” omitted vide GSR 540(E), dt. 31-8-2020, w.e.f. 1-9-2020.
                                 4  Inserted vide GSR 589(E), dt. 16-9-2005, w.e.f. 16-3-2006.
                                 5  Inserted vide 291(E), dt. 24-4-2014.
   436   437   438   439   440   441   442   443   444   445   446