Page 659 - The Central Motor Vehicles Rules, 1989
P. 659

ANNEXURE IV-ZB    THE CENTRAL MOTOR VEHICLES RULES, 1989             631

                                 Notes:
                                 1.   Additives  are  necessary to  fulfil the MD95  fuel specification  such as cetane
                                      improver as specified by the engine manufacturer, shall be added to the methanol
                                      fuel, as long as no negative side effects are known. If these conditions are satisfied,
                                      the maximum allowed amount is 10% m/m.
                                 2.   The values quoted in the specifications are "true values". In establishment of their
                                      limit values the terms of ISO 4259 Petroleum products - Determination and
                                      application of precision data in relation to methods of test have been applied and
                                      in fixing a minimum value, a minimum difference of 2R above zero has been taken
                                      into account; in fixing a maximum and minimum value, the minimum difference
                                      is 4R (R=reproducibility). Notwithstanding this measure, which is necessary for
                                      technical reasons, the manufacturer of fuels shall nevertheless aim at a zero value
                                      where the stipulated maximum value is 2R and at the mean value in the case of
                                      quotations of maximum and minimum limits. Should it be necessary to clarify
                                      whether a fuel meets the requirements of the specifications, the terms of ISO 4259
                                      shall be applied.
                                 3.   Equivalent EN/ISO methods will be adopted when issued for properties listed
                                      above.
                                 4.   Should  it be necessary to clarify whether a  fuel meets  the  requiremnets  of
                                      specifications, the terms of EN 15489 shall be applied.]
                                                            1
                                                             [ANNEXURE IV-ZB
                                                               [Refer rule 115H]        ANNEXURE IV-ZB
                                         TECHNICAL SPECIFICATIONS OF THE REFERENCE FUEL M85

                                                                                  1                  2
                                   Sl.       Parameter         Unit           Limits         Test method
                                   No.
                                                                        Minimum Maximum
                                   (1)         (2)             (3)        (4)       (5)         (6)

                                    1.  Research octane                  107.0     109.0    EN ISO 5164
                                        number, RON
                                    2.  Motor octane                      99.0     104.0    EN ISO 5163
                                        number, MON
                                                                  3
                                    3.  Density at 15˚C       kg/m           Report           ISO 3675
                                    4.  Vapour pressure        kPa        48.0     62.0    EN ISO 13016-1
                                                                                              (DVPE)
                                                    3,4
                                    5.  Sulphur content       mg/kg        —       160      EN ISO 20846
                                                                                            EN ISO 20884
                                    6.  Oxidation stability  minutes      360               EN ISO 7536
                                    7.  Existent gum content  mg/(100 ml)  —        20      EN-ISO 6246
                                        (solvent washed)
                                    8.  Ethanol and higher    % V/V        80       84    EN 1601, EN 13132
                                        alcohols 5                                            EN 14517

                                 1  Inserted vide GSR 37(E), dt. 17-1-2020, w.e.f. 17-1-2020.
   654   655   656   657   658   659   660   661   662   663   664