Page 541 - The Central Motor Vehicles Rules, 1989

FORM 22-A THE CENTRAL MOTOR VEHICLES RULES, 1989 513
1
[FORM 22-A
2 3
[See Rules 47(g), 115, 124(2), 125C, [125F, 125G], 126A, 127] FORM 22-A
INITIAL CERTIFICATE OF COMPLIANCE WITH POLLUTION STANDARDS,
SAFETY STANDARDS OF COMPONENTS AND ROAD WORTHINESS (FOR
VEHICLES WHERE BODY IS FABRICATED SEPARATELY)
PART I
(To be issued by the manufacturer)
Certified that the following vehicle complies with the provisions of the Motor
Vehicles Act, 1988, and the rules made thereunder, including the following mass
emission norms :
Brand name of the vehicle ..............................................................................
Chassis number ..............................................................................
Engine number/motor number ..............................................................................
(in case of battery operated vehicles)
Sub-rule No. ....... of rule 115 ..............................................................................
Emission norms ..............................................................................
(Bharat Stage-I/II/III etc.)
Signature of chassis manufacturer
Form 22-A, Part-I shall be issued with the signature of the manufacturer duly
printed in the Form itself by affixing facsimile signature in ink under the hand and seal
of the manufacturer.
4
[PART II
(To be issued by the body builder)
Certified that the body of the following vehicle has been fabricated by us and the
same complies with the provisions of the Motor Vehicles Act, 1988, and the rules made
thereunder:—
1. Brand name of the vehicle ..........................................................................
2. Chassis No. ........................................................
3. Engine No./Motor No. ...........................................
5
[*4. Bus Body Builder Accreditation Certificate Number ................ Date ...............
valid up to date ................
*5. Vehicle Body construction (Bus/Road Ambulance/Motor Caravan/etc.)
Type Approval Certificate Number ................................. Date .......................
issued by the approved Test Agency.]
*Applicable for buses only (Signature of the body builder)
[Form 22-A Part II shall be issued with the signature of the body builder duly printed
in the Form itself by affixing facsimile signature in ink under the hand and seal of the
body builder.]

1 Substituted vide GSR 784(E), dt. 12-11-2008, w.e.f. 1-4-2009
2 Substituted for “Refer Rules 47(g), 115, 124(2), 126A and 127(1), 127(2)” vide GSR 287(E), dt. 22-4-2014, w.e.f.
22-4-2014.
3 Inserted vide GSR 868(E), dt. 8-9-2016, w.e.f. 8-9-2016.
4 Substituted vide GSR 287(E), dt. 22-4-2014, w.e.f. 22-4-2014.
5 Substituted vide GSR 868(E), dt. 8-9-2016, w.e.f. 8-9-2016.