Page 546 - The Central Motor Vehicles Rules, 1989

518 THE CENTRAL MOTOR VEHICLE RULES, 1989 FORM 22B

6.24 Pad material: (Yes/No)
Note : Pad material specified in bus body code, or superior to that
specified, to be provided
6.25 Protection against fire risk: (Yes/No)
6.26 First aid equipment (Yes/No)
6.27 Measured values of interior noise level: (Yes/No)

6.28 Body structure strength: (Yes/No)
Enclose compliance report details
6.29 Bus structure stability: (Yes/No)
Enclose compliance report details
6.30 Doors: (Yes/No)
Enclose compliance report details of hinges and door handles.
Note : Door structures, door hinges, door handles and ethylene
propylene Diene monomer (EPDM) rubber sealing shall be provided
as specified in the bus body code.

6.31 Enclose compliance report details in respect of door components: (Yes/No)
Lighting, signaling and indicating system: (Yes/No)
6.32 (a) Type approval details of external lighting and signaling devices: (Yes/No)
(b) Installation details of external lighting and signaling devices:
(c) Details of internal lighting:
Indicate position of illumination devices, types of bulbs, photometric
requirement, dash board tell-tale lighting and control lighting, driver
cabin lighting, passenger compartment lighting and other area
lighting
Electrical equipment and wiring (Yes/No)
6.33 Enclose documents to establish compliance in respect of electrical (Yes/No)
cables, fuses, terminal, connector and elements:
Note: Electrical cables, fuses, terminal, connector and elements to be
provided as per the requirements specified in the bus body code.
6.34 Details of electrical circuit safety: (Yes/No)
Enclose documents to establish compliance to the requirements
specified in the bus body code.
Self-Declaration
This is to cerfity that—

(a) the body/structure of the above vehicle has been fabricated by us and the
same complies with the requirements of AIS:052 (Rev. 1) as amended from
time to time and all the provisions of the Motor Vehicles Act, 1988 and the
rules made thereunder;
(b) no alteration of chassis, its aggregates or components has been carried
out.]