Page 494 - The Central Motor Vehicles Rules, 1989

466 THE CENTRAL MOTOR VEHICLES RULES, 1989 RULE 190

16 Bogie Roller Set (i) Proper braking mechanism for
(For Roller Brake locking of rollers during exit of
Test or vehicle shall be provided
Speedometer (ii) The bogie rollers are to be
Test on suitably designed to
multi-axle HCV accommodate varying distances
with more than between axles and are to be
one live axle) embedded suitably to test both
brake and speedometer
Technical Specifications of equipment for testing Two Wheelers
17 Roller brake Parameter Technical specifications
tester
(a) Maximum load charge per 1 T
wheel
(b) Maximum measurable brake 3 kN
load
(c) Minimum Roller Diameter suitable roller diameter to test all
types of mopeds, scooters &
motorcycles
(d) Minimum Roller Separation Suitable roller separation to test
all types of mopeds, scooters &
motorcycles
(e) Minimum Roller Length Suitable roller length to test all
types of mopeds, scooters &
motorcycles
(f) Roller Surface—Minimum 0.6
frictional coefficient
(g) Roller Surface Service life Min. 50000 hrs.
(h) Brake load resolution <=10N
(i) Brake load accuracy ± 10N of measured value
(j) Approximate testing speed 5 km/h
18 Semi-Automatic Parameter Technical specifications
Headlight tester
(a) Light Intensity range measure 0 - 100000 cd
(min)
(b) Illumination Intensity range 0-200 lux
measure
(c) Headlight tester capable of 240 mm to 1500 mm
measuring headlamp with their
Centre above ground level
(d) Vertical and horizontal ± 50 cm/10 m (±15 %)
measuring Range
(e) Maximum deviation of ± 5 % of reading
intensity