Page 475 - The Central Motor Vehicles Rules, 1989

RULE 189 THE CENTRAL MOTOR VEHICLES RULES, 1989 447

(g) End- No Yes Visual AIS-008 or Visual inspection
Outline AIS-008 parameters:
Marker Lamps (Rev. 1) (i) Ensure secured
fitment of end outline
marker lamps;
(ii) Coloured lens shall
not be faded;
(iii) Lens should not be
broken;
(iv) No moisture
deposition on the inside
surface of the lens;
(v) Red coloured lens
shall face towards rear
and white lens to the
front.
(h) Direction No Yes Visual rule 102 and Visual inspection
Indicators AIS:008 or parameters:
AIS-008 (i) Flashing light
(Rev. 1) and emitted shall be Amber
AIS-009 or in colour;
AIS-009 (ii) Lens should not be
(Rev. 1) broken;
(iii) Lamps shall be
working;
(iv) No moisture
deposition on the inside
surface of the lens;
(v) Secured fitment of
the lamps.
(i) Hazard No Yes Visual AIS:008 or Visual inspection
Warning AIS-008 parameters:
Signal lamp (Rev. 1) and (i) Flashing light
AIS-009 emitted shall be Amber
(Rev. 1) in colour;
(ii) Ensure
simultaneous operation
of all direction indicator
lamps by use of switch.
(4) Suppressor No Yes Visual — Visual inspection
cap/High parameters:
Tension cable (A) Suppressor Cap:
(i) Suppressor cap shall
be in good condition
(B) High Tension Cable:
(i) High Tension cable
shall be properly
insulated;
(ii) Proper terminal
connections shall be
made on both sides of
High-Tension cable.