Page 484 - The Central Motor Vehicles Rules, 1989

456 THE CENTRAL MOTOR VEHICLES RULES, 1989 RULE 189

(ii) For transport
vehicles manufactured
on or after 01st October,
2015 that are dumpers,
tankers, school buses,
those carrying
hazardous goods or any
other category of
vehicles, as may be
specified by the Central
Government by
notification, the
maximum speed limit is
60 km/hr or any other
speed as specified by
the State Government.
(28) Spray No Yes Visual AIS-013 Visual inspection
Suppression (Rev. 1) parameters:
Devices Ensure presence of
securely fitted spray
suppression devices.
(29) Tyres No Yes Visual rule 94 and Visual inspection
95 parameters:
(i) Tyres shall not have
any serious damage
(patched or repaired by
an outside gaiter patch
other than a vulcanized
repair) or cut;
(ii) The Non-Skid Depth
(NSD), shall not be less
than 0.8 mm in the case
of three wheelers,
quadricycle, E-rickshaw
and E-Cart and1.6 mm
in the case of other
motor vehicles, below
the Tread Wear
Indicator (TWI)
embedded in tyres at
the time of manufacture;
(iii) Tyres shall be
properly inflated;
(iv) Tyres shall not
show signs of incipient
failure by local
deformation or swelling;
(v) Tyre casing fabric
shall not be exposed
due to wear of the tread
or by any unvulcanised
cut or abrasion in any of
its parts;