Page 487 - The Central Motor Vehicles Rules, 1989

RULE 189 THE CENTRAL MOTOR VEHICLES RULES, 1989 459

(b) Exhaust Yes No Functional
gas emission -
HC (ppm)
(c) Exhaust Yes No Functional Rule 115(2) Applicable for petrol
gas emission (i) - TABLE driven 2-Wheeler
(High idle A vehicles manufactured
emission) - as per BS VI norms
CO%
(d) Exhaust Yes No Functional Applicable for
gas emission petrol/CNG/LPG
(High idle driven 2-Wheeler
emission) - vehicles manufactured
Lambda l as per BS VI norms
(36) Braking Yes Yes Functional
System
Additional tests to be conducted on Two-Wheeler Electric Vehicles
(37) Protection No No Visual and AIS-038 (1) Visual inspection
against Functional (Rev.1) and parameters:
electric shock (Rev. 2) as (i) Ensure access probe
(For electric amended shall not touch live
vehicles only) from time to parts;
If system time (ii) In the case of the test
voltage is > for IPXXB in the areas
60V DC or 30 other than passenger
V AC compartment or
luggage compartment,
the jointed test finger
may penetrate to its 80
mm length, but the stop
face (diameter 50 mm x
20 mm) shall not pass
through the opening;
(iii) In case of the tests
for IPXXD inside the
passenger compartment
or luggage
compartment, the
access probe may
penetrate to its full
length, but the stop face
shall not fully penetrate
through the opening.
(2) Functional test
requirements:
(i) When the
requirements of IPXXB
and IPXXD are verified
by a signal circuit
between the probe and
live parts, ensure that
the lamp shall not light